Copy Machine Drum Replacement Tips
A machine drum is one of the most important parts of a copier. It works like a rolling stamp that applies the toner to the page. It uses high-intensity light and conducts electricity as the image is being copied on the surface of the drum before it becomes visible on paper. You should always keep your copier’s drum in good condition if you want to produce quality copies all the time. So when do you need to replace the drum in your copy machine? A good answer would be when you see lines, streaks or any unwanted marks on your prints even when you’re working with a clean original copy. Other signs to watch out for are blurry pages, blank pages, gray pages, and strange sounds coming from the machine. You can try cleaning the drum first, but if symptoms persist you may need to have it replaced right away. How to Clean Your Copy Machine Drum? If you’ve already checked your copy machine drum and have confirmed that it needs cleaning, please follow these steps: Since the drum is very sensitive to light, clean it in an area with very little light. In case your copier’s drum is damaged due to light exposure, put it in a dark room for several minutes before putting it back on your machine. How to Replace Your Copy Machine Drum? Replacing your copy machine drum is very similar to cleaning it. Once you’ve removed the old drum, open the new one from its packaging and insert the toner cartridge into the unit. You’ll know that it’s in place if you here a click and the lock lever automatically lifts. You can put it back on the machine once the assembly is done. If you have a hard time putting it back, just remove and reseat it. Don’t force it in to avoid causing damage. If your location is around New York, you may also visit Copier New York and Copier Lease New York or call Service Location NEW YORK : (866) 620-2287